This rugged workhorse of the mailing industry is universally known as the best production value for the busy mail center and/or office environment. Engineered for reliable and long lasting service, the 9800, receiving periodic enhancements, has been in production for over 30 years. It will automatically collate, stuff, seal and stack envelopes or pass them through an inline postage meter to yield a finished mailing ready for bundling.

The basis of its smooth high-speed operation is the parallel or conjugated cam. Mailcrafters gripper arm detection system guards against missed or double inserts and is regarded as the most reliable in the industry. Document selection and separation from the insert stations is by vacuum control which gives 9800 a high degree of consistency and reliability for all types of paper media.

The Edge Series Model 9800 is available in upstacker, envelope turn-over, sealer-roller and conveyor configuration. Standard features include a safety two hand start and simple initial machine setup, without special tools. A true "operator friendly" inserting machine.
 

STANDARD

• Insert Stations: 6
• Insert Size:6" x 9 ¼" thickness
• Envelope Size: 6½" x 19½"" maximum
                        3½" x 5½" minimum
• Envelope Flap Depth: 2 3/8" Maximum
• Power Requirements:
    220 Volt Single Phase 15 amperes (stacker)
    220 Volt Three Phase 10 amperes (stacker)
• B.T.U. Ratings:
    220 Volt Single Phase 2405 BTU/hr.
    220 Volt Three Phase 1479 BTU/hr
• Machine Weights:
    6 stations: 
    Conveyor: 152 lbs.
    Stacker: 1266 lbs.
    Postage meter: 1351 lbs.

 OPTIONAL

• Additional Stations on Request (RM)
• Open Feed Station
• Book Feed Station
• Push Feed in Station or Open Station
• Friction Feeder
• Postal Permit Printer
• Zip Mark Reader
• Envelope Track Detect
• Insert Track Detect
• End Fold
• Density Checker
• 8 Foot Conveyer

This state of the art inserting machine has earned the reputation as the best large envelope equipment in the mailing industry. Handling

The basic smoothness of this large envelope inserter lies in its drive mechanism, the conjugated cam. Simply adjusted, the error detection system is located on the station gripper arm and is regarded as the finest in the industry. Documentation selection is by vacuum control giving the 1200 the ultimate media selection reliability regardless of paper quality or type.

The machine is available in envelope turn-over or sealer-roller configuration. Features include a two handed "safety" start, simple job setup and changeover, and a host of options to satisfy any mail center need. The first choice of professional mailrooms: MAILCRAFTERS.
 

STANDARD

• Insert Stations: 6
• Insert Size:8 5/8" x 11 1/4" - ¼" thickness (overall 3/8" max.)
• Envelope Size: 9" x 12½"" maximum
                        7½" x 4" minimum
• Envelope Flap Depth: 3" Maximum
• Power Requirements:
    220 Volt Single Phase
    220 Volt Three Phase
• B.T.U. Ratings:
    220 Volt Single Phase 2405 BTU/hr.
• Machine Weights:
    6 stations: 1694 lbs.
    Conveyor: 152 lbs.

 OPTIONAL

• Additional Stations on Request
• Open Feed Station
• Book Feed Station
• Push Feed in Station or Open Station
• Friction Feeder
• Zip Mark Reader
• Envelope Track Detect
• Insert Track Detect
• End Fold
• Density Checker
• 8 Foot Conveyer

This state-of-the-art complete intelligent production mail finishing system was designed and manufactured to answer your

Thor's unique combination of in-line reading, gathering, folding, and inserting capabilities allow for a rapid, efficient, and secure method of starting and completing your production mail tasks with a minimum amount of labor and a maximum of confidence.

Thor's ability to read Optical Marks, and/or Bar Codes enhances the system's flexibility, allowing your organization the opportunity to maximize your standard technologies in the pursuit of absolute document matching and integrity.

The standard Thor System comes complete with a proven in-line reading, gathering, and folding module, combined with the exemplary "Edge Series" MailCrafter 9800-6PM Inserter. The front end component comes standard with Optical Mark reading capability. The inserter is a 6-station (6x9) inserter with turnover capability and an accompanying 5.5 ft. conveyor.

With over 30 years of expertise in the production mail systems business, Inscerco Mfg. has always manufactured the MailCrafters product with a fervent desire to maintain and enhance their reputation of quality craftsmanship, leading edge market vision, and operator friendliness, creating an unparalleled world of happy and loyal customers ... Come join our world today!

Feeder-Folder-Accumulator

• Paper Weight: 20# (75 GSM) (inquire for heavier paper weight capability)
• Paper Size: 7" x 7" to 12" x 14"
• Loading Capacity: 2,000 Sheets (20# Bond)
• Fold Types: "C"/"Z"/"V"/ and Double "V"

Inserter

• Insert Stations: 6 or 4
• Insert Size: 6" x 9" ¼" Thickness

• Envelope Size:

  6½" x 9½" Maximum 3½" x 5½" Minimum

• Envelope Flap Depth: 2 3/8" Maximum
   

SYSTEM COMPONENTS
9800-6PM Edge Series, 6 Station Inserter with 180° Turnover and Conveyor

• Feeder: Bottom Feed, Top Loading for Continuous Operation
• Optical Mark Reading Capability
  (for group batching, sequencing, and double printing control for 1 to 5 document groups)
• Folder: 4 Plates
• Group Selector: 1 to 5 Sheet Selection Settings
• Counter Models: Total Count, Batch Count, and Resettable Count
• Displays and Controls: Dual Intuitive Controls with Self-Diagnostic "Error" Modules

SYSTEM OPTIONS (partial list)

• Additional Insert Stations
• Bar Code Reading Capability
• Open Feed/Book Feed Stations
• Insert/Envelope Track Detection
• Friction Feeder
• Push Feed in Station or Open Station
• Postal Permit Printer
• 8 Ft. Conveyor

Product Notes
9800 L/Stretch Configuration

Insert Size:	11¼" x 6" maximum
Envelope Size:	12" x 7" maximum 5½" x 3½" minimum (PM version varies)

Model 1200 and 1200X
Can be configured with the Thor System capabilities.
Please inquire about a custom system solution.